CAD (0)
  • Cart is empty
PEM® TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosures. TY-D hardware installs quickly and permanently without screws and eliminates the use of adhesives that typically fail over time and temperature cycling.

TY-D hardware can be a great improvement over traditional mounting methods. They can be placed with assurance at designed locations and angles to remain secure for the life of the assembly; they will not protrude on the reverse side and will not affect the reverse side appearance or clearance; and panels remain flush, minimizing EMI/RFI and contamination of electronics by dust or dirt.
Unit of Measure
Items
Standard tie-mount – TD

Self-Clinching TY-D®Cable Tie-Mounts - Metric Type TD

Standard tie-mount – TD

Self-Clinching TY-D®Cable Tie-Mounts - Metric Type TD

Standard tie-mount – TD

Self-Clinching TY-D®Cable Tie-Mounts - Metric Type TD

Standard tie-mount – TD

Self-Clinching TY-D®Cable Tie-Mounts - Metric Type TD

Standard tie-mount – TD

Self-Clinching TY-D®Cable Tie-Mounts - Metric Type TD
Type N/A TDS
Profile1 N/A 40 N/A 60 N/A 175 N/A 40 N/A 60
Length Code N/A 4 N/A 6 N/A 12 N/A 4 N/A 6
L - Length ± 0.08
N/A 3.07 mm Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A 4.67 mm Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A 9.42 mm Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A 3.07 mm Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A 4.67 mm Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG
Sheet Thickness N/A 1.02 - 1.27 mm N/A 1.02 -1.78 mm N/A 1.02 - 3.18 mm N/A 1.02 - 1.27 mm N/A 1.02 -1.78 mm
Hole Size In Sheet + 0.05 -0.03 N/A 6.35 x 3.18 mm N/A 7.93 x 4.75 mm N/A 12.70 x 9.53 mm N/A 6.35 x 3.18 mm N/A 7.93 x 4.75 mm
A ± 0.08 N/A 6.25 mm N/A 7.82 mm N/A 12.60 mm N/A 6.25 mm N/A 7.82 mm
B ± 0.15 N/A 1.40 mm N/A 1.91 mm N/A 3.3 mm N/A 1.40 mm N/A 1.91 mm
C ± 0.15 N/A 1.65 mm N/A 1.65 mm N/A 2.40 mm N/A 1.65 mm N/A 1.65 mm
D ± 0.15 N/A 4.06 mm N/A 5.21 mm N/A 9.14 mm N/A 4.06 mm N/A 5.21 mm
E ± 0.15 N/A 7.82 mm N/A 9.4 mm N/A 14.28 mm N/A 7.82 mm N/A 9.4 mm
G - Height ± 0.15 N/A 3.81 mm N/A 4.57 mm N/A 7.24 mm N/A 3.81 mm N/A 4.57 mm
Min. Hole Edge to Sheet Edge K N/A 1.02 mm
Min. Hole Edge to Sheet Edge M N/A 3.73 mm N/A 4.98 mm N/A 6.65 mm N/A 3.73 mm N/A 4.98 mm
Standard Material N/A 17-4 Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380 N/A Passivated and/or tested per ASTM A380 N/A Passivated and/or tested per ASTM A380 N/A Zinc plated 8µm, Colorless, over Nickel Strike N/A Zinc plated 8µm, Colorless, over Nickel Strike
Max. Panel Hardness N/A HRB 70 / HB 125 OR LESS
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 Reference to typical load rating (in pounds) for appropriate size nylon cable tie.