Print Back
Locking and Non-locking Threads
These fasteners provide load-bearing threads in thin sheets and permit up to .030” adjustment for mating  hole misalignment.

The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using  any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.

Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the  retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque  performance is equivalent to applicable NASM25027 specifications.

Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets  as thin as .038” with hardness up to HRB 88 on the Rockwell “B” scale.

Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our  web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
Floating-Nuts-non-locking
Floating Self-Clinching Fasteners - Types A4, AS, AC 2
Unit of Measure
Items Floating-Nuts-non-locking
AS-440-1ZI
Floating Self-Clinching Fasteners A4, AS, AC - Unified
Floating-Nuts-non-locking
AS-632-1ZI
Floating Self-Clinching Fasteners A4, AS, AC - Unified
Floating-Nuts-non-locking
AS-832-1ZI
Floating Self-Clinching Fasteners A4, AS, AC - Unified
Floating-Nuts-non-locking
AS-024-1ZI
Floating Self-Clinching Fasteners A4, AS, AC - Unified
Floating-Nuts-non-locking
AS-032-1ZI
Floating Self-Clinching Fasteners A4, AS, AC - Unified
Thread Size N/A .112-40 (#4-40) N/A .138-32 (#6-32) N/A .164-32 (#8-32) N/A .190-24 (#10-24) N/A .190-32 (#10-32)
Thread Type N/A Non-Locking a1369.jpg
Thread Code N/A 440 N/A 632 N/A 832 N/A 024 N/A 032
Shank Code N/A 1
A (Shank) Max. N/A 0.038 in a1367.jpg
Min. Sheet Thickness N/A .038 in
Hole Size in Sheet + .003 - .000 N/A .290 in N/A .328 in N/A .368 in N/A .406 in N/A .406 in
C Max. N/A .289 in N/A .327 in N/A .367 in N/A .405 in N/A .405 in
D Max. N/A .290 in N/A .335 in N/A .365 in N/A .405 in N/A .405 in
E ± .015 N/A .360 in N/A .390 in N/A .440 in N/A .470 in N/A .470 in
T1 Max. N/A .130 in N/A .130 in N/A .130 in N/A .170 in N/A .170 in
Min. Dist. Hole C/L to Edge N/A .300 in N/A .320 in N/A .34 in N/A .360 in N/A .360 in
Float N/A .015” minimum, in all directions from center, .030” total
Fastener Material N/A Steel
Fastener Materials - Retainer N/A Heat-Treated Carbon Steel
Fastener Materials - Nut N/A Carbon Steel
Standard Finish - Retainer & Nut N/A Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless
For Use in Sheet Hardness1 N/A HRB 70 / HB 125 or Less
Thread Specification N/A Internal, ANSI B1.1, 2B
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.