PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
PEM® KEYHOLE® Standoffs are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. PEM KEYHOLE fasteners can save valuable time and dramatically reduce the amount of loose hardware required. Type SKC can be used for spacing or hanging of replaceable components. Typically, several SKC standoffs are used with one standard PEM threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

Type SKC - Allows detachable spacing of two sheets
  • Clinch feature mounts fastener permanently into metal sheet.
  • Unique barrel design allows for quick attachment and detachment.
  • Head is flush with one side of metal sheet.
  • Makes horizontal or vertical component mounting possible.
Keyhole® standoffs – SKC
KEYHOLE® Self-clinching Standoffs Type SKC™ 2
Unit of Measure
Items Keyhole® standoffs – SKC
SKC-6060-2
KEYHOLE® Self-clinching Standoffs Type SKC™ - Unified 		Keyhole® standoffs – SKC
SKC-6060-4
KEYHOLE® Self-clinching Standoffs Type SKC™ - Unified 		Keyhole® standoffs – SKC
SKC-6060-6
KEYHOLE® Self-clinching Standoffs Type SKC™ - Unified 		Keyhole® standoffs – SKC
SKC-6060-8
KEYHOLE® Self-clinching Standoffs Type SKC™ - Unified 		Keyhole® standoffs – SKC
SKC-6060-10
KEYHOLE® Self-clinching Standoffs Type SKC™ - Unified
Panel 1 (Bottom) Sheet Thickness Min. N/A .040 in
Panel 1 (Bottom) Mounting Hole B + .003 - .000 N/A .213 in
Panel 2 (Top) Thickness Range N/A .057 to .064 in
Panel 2 (Top) Mounting Hole A1 Nom. N/A .059 in
Panel 2 (Top) Mounting Hole A2 ± .003 N/A .118 in
Panel 2 (Top) Mounting Hole A3 ± .003 N/A .197 in
Panel 2 (Top) Mounting Hole A4 Min. N/A .148 in a1326.jpg
Panel 1 (Bottom) Sheet Hardness Max.1 N/A HRB 70 / HB 125
Panel 2 (Top) Material N/A Any
A ± .003 N/A .099 in SKC.jpg
B ± .003 N/A .177 in
C Max. N/A .212 in
D Anvil Hole + .003 - .000 N/A .216 in
H Nom. N/A .250 in
L - Length ± .005 N/A .063 in N/A .125 in N/A .188 in N/A .250 in N/A .312 in
M Max. N/A .108 in
S ± .003 N/A .068 in
Panel 1 (Bottom) Edge Distance C1 Min. N/A .260 in a1324.jpg
Panel 1 (Bottom) Location Tolerance Max. N/A ±.005 in
Panel 2 (Top) Edge Distance C2 Min. N/A .160 in
Standard Material N/A 300 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.