Print Back
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.

SKSF™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

  • Allow detachable spacing of two sheets
  • Clinch feature mounts fastener permanently and flush into metal sheet
  • Unique barrel design allows for quick attachment and detachment
  • Makes horizontal or vertical component mounting possible
SKCF_SK4F_SKSF
SKCF_SK4F_SKSF_Dim
Unit of Measure
Items SKCF_SK4F_SKSF
SKSF-6060-4ZI
SELF-CLINCHING KEYHOLE® FASTENERS - SKSF™ - Unified
SKCF_SK4F_SKSF
SKSF-6060-6ZI
SELF-CLINCHING KEYHOLE® FASTENERS - SKSF™ - Unified
SKCF_SK4F_SKSF
SKSF-6060-8ZI
SELF-CLINCHING KEYHOLE® FASTENERS - SKSF™ - Unified
SKCF_SK4F_SKSF
SKSF-6060-10ZI
SELF-CLINCHING KEYHOLE® FASTENERS - SKSF™ - Unified
SKCF_SK4F_SKSF
SKSF-6060-12ZI
SELF-CLINCHING KEYHOLE® FASTENERS - SKSF™ - Unified
Panel 1 (Bottom) Sheet Thickness Min. N/A .040 in
Panel 1 (Bottom) Mounting Hole B + .003 - .000 N/A .213 in
Panel 2 (Top) Thickness Range N/A .057 to .064 in
Panel 2 (Top) Mounting Hole A1 Nom. N/A .059 in
Panel 2 (Top) Mounting Hole A2 ± .003 N/A .118 in
Panel 2 (Top) Mounting Hole A3 ± .003 N/A .197 in
Panel 2 (Top) Mounting Hole A4 Min. N/A .148 in a1326.jpg
Panel 1 (Bottom) Sheet Hardness Max.1 N/A HRB 80 / HB 150 N/A HRB 80 / HB 150 N/A HRB 80 / HB 150 N/A HRB 80 / HB 150 N/A HRB 70 / HB 125
Panel 2 (Top) Material N/A Any
A ± .003 N/A .099 in a1323.jpg
B ± .003 N/A .177 in
C Max. N/A .212 in
D Anvil Hole + .003 - .000 N/A .216 in
H Nom. N/A .250 in
L - Length ± .005 N/A .125 in N/A .188 in N/A .250 in N/A .312 in N/A .375 in
M Max. N/A .108 in
S ± .003 N/A .068 in
Panel 1 (Bottom) Edge Distance C1 Min. N/A .260 in a1324.jpg
Panel 1 (Bottom) Location Tolerance Max. N/A ±.005 in
Panel 2 (Top) Edge Distance C2 Min. N/A .160 in
Standard Material N/A Hardened Steel
Standard Finish N/A Zinc Plated per ASTM B633, SC1 (5µm) Type III, Colorless
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.