PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
  • Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position
  • Lobed Black ABS Cap standard
  • Other molded-thru colors available on special order
  • If you require a custom color or yo
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M3.5 x 0.6
Cap Color1 N/A
Black (standard) #001

CAD View

 N/A Retracted

C ± 0.25

 N/A 11.18 mm a1311.jpg

E ± 0.25

 N/A 13.77 mm

G ± 0.64

 N/A 4.78 mm

L ± 0.38

 N/A 12.95 mm

P ± 0.64

 N/A 0 mm

T Nom.

 N/A 16.84 mm

T1 Nom.

 N/A 12.14 mm

T2 Nom.

 N/A 16.41 mm

Total Radial Float

 N/A 0.51

Driver Size

 N/A #2 Phillips

For Use in Sheet Hardness

 N/A NOT APPLICABLE
Thread Specification2 N/A External, ANSI/ASME B1.13M, 6g

Cap Material

 N/A ABS. Temperature limit is 200° F / 93° C

Screw Material

 N/A Carbon Steel

Screw Finish

 N/A Bright Nickel over Copper Flash per ASTM B689, Type II

CAD Supplier

 N/A PennEngineering® (PEM®)
  • 1 The colors codes #002 thru #007 are non-stocked standards and available on special order
  • 2 As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.