PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
Type SMPP self-clinching nuts are for installation into ultra-thin sheets.
  • Installs into stainless steel sheets as thin as 0.64 mm.
  • Corrosion resistance similar to 300 series stainless steel.
  • Reduced outer dimensions and thinner sheet capabilities compared to type SP thread sizes.
  • Recommended for use in stainless steel sheets HRB 90 / HB 192 or less.
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M2.5 x 0.45

Thread Code

 N/A M2.5

A (Shank) Max.

 N/A 0.61 mm a1384.jpg

Min. Sheet Thickness

 N/A 0.64 mm

Hole Size in Sheet + 0.08

 N/A 3.8 mm

C Max.

 N/A 3.79 mm

E ± 0.25

 N/A 5.6 mm

T ± 0.25

 N/A 1.4 mm

Min. Dist. Hole C/L to Edge

 N/A 3.9 mm

For Use in Sheet Hardness

 N/A HRB 90 / HB 192 or Less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A Age hardened A286 Stainless Steel (non-magnetic)

Standard Finish

 N/A Passivated and/or tested per ASTM A380

CAD Supplier

 N/A PennEngineering® (PEM®)