Print Back
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.

Type SKS-R™ fasteners are designed so that two sheets can be quickly joined flat against each other. Typically, several fasteners are used with one standard PEM®more
Unit of Measure

Specifications

Panel 1 (Bottom) Sheet Thickness Min.

.032 in

Panel 1 (Bottom) Mounting Hole B + .003 - .000

.237 in

Panel 2 (Top) Thickness Range

.032 to .038 in

Panel 2 (Top) Mounting Hole A1 Nom.

.059 in

Panel 2 (Top) Mounting Hole A2 ± .003

.118 in

Panel 2 (Top) Mounting Hole A3 ± .003

.197 in

Panel 2 (Top) Mounting Hole A4 Min.

.148 in a1326.jpg
Panel 1 (Bottom) Sheet Hardness Max.1 HRB 88 / HB 183

Panel 2 (Top) Material

Any

A Max.

.032 in SKS-R_Dimension.PNG

B ± .003

.177 in

C Max.

.236 in

D Anvil Hole + .003 - .000

.183 in

H Nom.

.276 in

M Max.

.159 in

N ± .003

.099 in

S ± .003

.119 in

Panel 1 (Bottom) Edge Distance C1 Min.

.276 in SKS-R_Panel.PNG

Panel 1 (Bottom) Location Tolerance Max.

±.005 in

Panel 2 (Top) Edge Distance C2 Min.

.160 in

Standard Material

400 Series Stainless Stee

Standard Finish

Passivated and/or tested per ASTM A380

CAD Supplier

PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.