PennEngineering - PR10 Self-Clinching Flush-Mounted Retainers - Unified

Unit of Measure

Items	PR10-440 PR10 Self-Clinching Flush-Mounted Retainers - Unified	PR10-632 PR10 Self-Clinching Flush-Mounted Retainers - Unified	PR10-832 PR10 Self-Clinching Flush-Mounted Retainers - Unified	PR10-032 PR10 Self-Clinching Flush-Mounted Retainers - Unified
Thread Size	N/A .112-40 (#4-40)	N/A .138-32 (#6-32)	N/A .164-32 (#8-32)	N/A .190-32 (#10-32)
Type¹	N/A PR10
Thread Code	N/A 440	N/A 632	N/A 832	N/A 032
A (Shank) Max.	N/A .125 in
Min. Sheet for Self-Clinching	N/A .050 in
Min. Sheet for Flush Installation	N/A .125 in
Hole Size in Sheet + 0.003 - 0.000	N/A .281 in	N/A .312 in	N/A .344 in	N/A .375 in
B Nom.	N/A .195 in	N/A .225 in	N/A .255 in	N/A .290 in
C Max.	N/A .280 in	N/A .311 in	N/A .343 in	N/A .374 in
E Nom.	N/A .310 in	N/A .340 in	N/A .370 in	N/A .41 in
H Nom.	N/A .075 in
Min. Dist. Hole C/L to Edge	N/A .310 in	N/A .330 in	N/A .34 in	N/A .360 in
Thread Specification	N/A ANSI B1.1, 2B
Material	N/A 300 Series Stainless Steel
Finish	N/A Passivated and/or Tested per ASTM A380
For Use in Sheet Hardness	N/A HRB 70 or Less (Hardness Rockwell “B” Scale) / HB 125 or Less (Hardness Brinell)
CAD Supplier	N/A PennEngineering® (PEM®)
¹ 2B (unified) and 6H (metric) go gauge may stop at pilot end but class 3A (unified) and 4h (metric) screws will pass through with finger torque.