PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
    Press-fit with strong, reusable threads. No heat or ultrasonics required.
  • Install with a simple arbor press.
  • Sharp knurls cut into the material to provide torque resistance.
  • Retention fin/barb adds pull-out strength.
  • Excellent for harder plastics including many thermoset resins.
  • Flange design resists higher tensile pull loads in reverse entry applications.
Solid Body IPFB, IPFC and IPFA Press-in Inserts
Solid Body IPFB, IPFC and IPFA Press-in Inserts_DIM
Unit of Measure
Items Solid Body IPFB, IPFC and IPFA Press-in Inserts
IPFA-024
Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Unified 		Solid Body IPFB, IPFC and IPFA Press-in Inserts
IPFA-032
Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Unified 		Solid Body IPFB, IPFC and IPFA Press-in Inserts
IPFA-0420
Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Unified 		Solid Body IPFB, IPFC and IPFA Press-in Inserts
IPFA-0428
Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Unified 		Solid Body IPFB, IPFC and IPFA Press-in Inserts
IPFA-0518
Solid Body IPFB™, IPFC™ and IPFA™ Press-in Inserts - Unified
Thread Size N/A .190-32 (#10-32) N/A .190-24 (#10-24) N/A .250-20 (1/4-20) N/A .250-28 (1/4-28) N/A .313-18 (5/16-18)
Type N/A IPFA
Thread Code1 N/A 024 N/A 032 N/A 0420 N/A 0428 N/A 0518
A ± .005 N/A .328 in Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A .328 in Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A .364 in Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A .364 in Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg N/A .364 in Solid-Body-IPFB--IPFC-and-IPFA-Press-in-Inserts_DIM.jpg
E ± .005 N/A .313 in N/A .313 in N/A .375 in N/A .375 in N/A .438 in
C Max. N/A .243 in N/A .243 in N/A .306 in N/A .306 in N/A .367 in
T ± .005 N/A .043 in N/A .043 in N/A .050 in N/A .050 in N/A .050 in
Min. Hole Depth N/A .358 in N/A .358 in N/A .394 in N/A .394 in N/A .394 in
Hole Dia. ± 0.002 N/A .244 in N/A .244 in N/A .307 in N/A .307 in N/A .368 in
Thread Specification N/A 2B per ASME B1.1
Standard Material N/A Aluminum
CAD Supplier N/A PennEngineering® (SI®)
  • 1 Thread tapped thru, Class 3A/4h screw must pass with finger torque, but basic go gauge may stop at last thread.