Part # PFTRCS-5.0-1.0, Self-Clinching Roller Bearing Fasteners

PEM® PFTRCS™ and PFTRFS™ roller bearing fasteners are permanently mounted in sheets as thin as .040” / 1 mm.

Support loads while guiding and positioning components
Create friction free assemblies
Eliminate oil lubricants typically used in drawer slides
Eliminate loose hardware needed to assemble drawer slides

PEM® PFTRCS™ self-clinching roller bearing fasteners and PFTRFS™ flaring roller bearing fasteners are easily installed into prepunched or drilled holes.

Unit of Measure

Specifications

Type	N/A PFTRCS
Fastener Diameter Code	N/A 5.0
Min. Sheet Thickness Code	N/A 1.0
A (Shank) Nom.	N/A 0.038 in0.97 mm
Min. Sheet Thickness	N/A .040 in1.0 mm
Hole Size in Sheet +.003"/+0.08mm	N/A .130 in3.3 mm
C Max.	N/A .129 in3.28 mm
D Nom.	N/A 0.154 in3.9 mm
E ±.004"/±0.1mm	N/A .197 in5.00 mm
T Nom.	N/A .177 in4.5 mm
Min. Dist. Hole C/L to Edge	N/A .177 in4.5 mm
Material Roller Bearing	N/A 300 Series Stainless Steel
Material Retainer	N/A Through Hardened Carbon Steel
Finish Roller Bearing	N/A Passivated and/or Tested per ASTM A380
Finish Retainer	N/A Semi-bright Electroless Nickel per ASTM B733
For Use in Sheet Hardness	N/A For Use in Sheet Hardness HRB 80 / HB 150 or less
CAD Supplier	N/A PennEngineering® (PEM®)

Specifications

Type

Fastener Diameter Code

Min. Sheet Thickness Code

A (Shank) Nom.

Min. Sheet Thickness

Hole Size in Sheet +.003"/+0.08mm

C Max.

D Nom.

E ±.004"/±0.1mm

T Nom.

Min. Dist. Hole C/L to Edge

Material Roller Bearing

Material Retainer

Finish Roller Bearing

Finish Retainer

For Use in Sheet Hardness

CAD Supplier