Batch CAD Cart (0)
  • Cart is empty

Online literature contains the most current information available.
These standoffs ensure permanent mounting in metal sheets as thin as .062 in.

The fastener head is locked securely in a blind, milled hole and is able to handle substantial loads. The concealed-head feature allows the side of the sheet opposite installation to remain smooth.

Sheet preparation only requires a milled blind hole to the recommended minimum depth. Center-cutting end mills for hole preparation are available from PennEngineering. Installation of the concealed-head studs and standoffs is simple using a hollow anvil and solid punch. Place the head of the fastener in the hole and insert using any standard press. Displaced sheet metal flows smoothly around the head into the undercut.
76 - 80 of 80 | Results Per Page | View | Unit of Measure
1 2 3 4 

Part #

Thread Size

Style

Shank

Blind Mounting Hole Diameter + .003 - .000

L - Length + .002 –.005

A Max.

B Max.

C Max.

CAD

Min. Depth Full Thread F

Sort by
CSS-832-3 N/A .164-32 (#8-32) N/A #1 N/A Short N/A .312 in N/A .187 in N/A .041 in N/A .245 in N/A .311 in N/A N/A .250 in
CSS-832-4 N/A .164-32 (#8-32) N/A #1 N/A Short N/A .312 in N/A .250 in N/A .041 in N/A .245 in N/A .311 in N/A N/A .250 in
CSS-832-5 N/A .164-32 (#8-32) N/A #2 N/A Short N/A .312 in N/A .312 in N/A .041 in N/A .245 in N/A .311 in N/A N/A .250 in
CSS-832-6 N/A .164-32 (#8-32) N/A #2 N/A Short N/A .312 in N/A .375 in N/A .041 in N/A .245 in N/A .311 in N/A N/A .250 in
CSS-832-8 N/A .164-32 (#8-32) N/A #3 N/A Short N/A .312 in N/A .500 in N/A .041 in N/A .245 in N/A .311 in N/A N/A .250 in
76 - 80 of 80 | Results Per Page | View | Unit of Measure
1 2 3 4