Batch CAD Cart (0)
  • Cart is empty

Online literature contains the most current information available.
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.

These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.

These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.
26 - 30 of 30 | Results Per Page | View | Unit of Measure
1 2 

Part #

L - Length ± .005

H ± .005

P ± .005

Standard Material

Standard Finish

CAD

SSC-156-18 N/A .562 in N/A .250 in N/A .141 in N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A
SSC-156-20 N/A .625 in N/A .250 in N/A .141 in N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A
SSC-156-24 N/A .750 in N/A .250 in N/A .141 in N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A
SSC-156-28 N/A .875 in N/A .250 in N/A .141 in N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A
SSC-156-32 N/A 1.00 in N/A .250 in N/A .141 in N/A 400 Series Stainless Steel N/A Passivated and/or tested per ASTM A380 N/A
26 - 30 of 30 | Results Per Page | View | Unit of Measure
1 2