Batch CAD Cart (0)
  • Cart is empty

Online literature contains the most current information available.

Application area

  • These press-in and rivet studs can be universally used for component thicknesses from 0.60 to 3.50 mm and tensile strengths of up to 1200 MPa
  • Suitable for a wide range of high dynamic, static and impact load conditions
  • Suitable for use where threaded fittings need to be resistant to high axial forces
  • Also suitable for the accommodation of lateral forces
  • Can be used for GRP, CFRP, aluminium or other materials
  • Suitable for use with surface-treated, galvanised or painted components

Technical characteristics

  • Thread sizes: M5 to M10
  • P.C. 8.8 (standard)
  • Resistance to corrosion in accordance with the customer´s requirements
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • High resistance to twist and ejection forces, even for thin sheet metals
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
  • Stud positioning tolerance ranges can be halved as compared to welding methods
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1 

Part #

Thread Size

Panel Thickness Range

CAD

SBF06 N/A M6x1.00 N/A 0.60 - 2.00 mm N/A
SBF08 N/A M8x1.25 N/A 0.80 - 2.50 mm N/A
SBF10 N/A M10x1.50 N/A 1.00 - 3.50 mm N/A
1 - 3 of 3 | Results Per Page | View | Unit of Measure
1