CAD (0)
  • Cart is empty
  • Full hex feature for high torque applications.
  • Allows near-flush installations with no need for special hole preparations.
  • Standard material: Low Carbon Steel.
  • Materials available on special order: 300 Series Stainless Steel, Alloy No. 260 Brass, 6053-T4 or 6061-T4 Aluminum.
26 - 36 of 36 | Results Per Page | View | Unit of Measure
1 2 

Part #

Thread Size x Pitch

Grip Range

A ± 0.25

M Ref.

Fastening

Standard Finish

CAD

N/A M5 x 0.8 N/A 3.00 - 5.50 mm N/A N/A 7.00 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M6 x 1 N/A 0.50 - 3.00 mm N/A 15.05 mm N/A N/A Uninstalled N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M6 x 1 N/A 0.50 - 3.00 mm N/A N/A 9.35 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M6 x 1 N/A 3.00 - 5.50 mm N/A 17.55 mm N/A N/A Uninstalled N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M6 x 1 N/A 3.00 - 5.50 mm N/A N/A 8.90 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M8 x 1.25 N/A 0.50 - 3.00 mm N/A 16.60 mm N/A N/A Uninstalled N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M8 x 1.25 N/A 0.50 - 3.00 mm N/A N/A 10.65 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M8 x 1.25 N/A 3.00 - 5.50 mm N/A 19.10 mm N/A N/A Uninstalled N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M8 x 1.25 N/A 3.00 - 5.50 mm N/A N/A 9.75 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M10 x 1.5 N/A 0.70 - 3.50 mm N/A 20.40 mm N/A N/A Uninstalled N/A Zinc Nickel N/A CAD Icon (for items table)
N/A M10 x 1.5 N/A 0.70 - 3.50 mm N/A N/A 12.35 mm N/A Installed N/A Zinc Nickel N/A CAD Icon (for items table)
26 - 36 of 36 | Results Per Page | View | Unit of Measure
1 2