Part Search
Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    PEM® CASTSERT™ Press-in Inserts - Metric
PennEngineering
All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT™ Press-in Inserts - Metric > Part # CKS-M4-2  

Part # CKS-M4-2, PEM® CASTSERT™ Press-in Inserts - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.


  • Designed for flush installation with flat punch and anvil into blind holes or thru-holes
  • Process cost savings vs. coil inserts or thread tapping
  • Installed into drilled holes or as-cast holes with low draft angle
  • Pilot for rapid seating and self-alignment
  • Symmetric for auto-feed capability

    • Fastener drawings and models are available at www.pemnet.com




     Specifications   

    Thread Size x Pitch
    		M4 x 0.7

    Type
    		CKS

    Thread Code
    		M4

    Length A ±0.13

     View
    12.07 mm

    Pilot C Max.
    		6.76 mm

    After Knurl E (Nom.)
    		7.49 mm

    Min. Sheet Thickness R
    		12.19 mm

    Straight Hole Dia. D + 0.08
    		7.15 mm

    Min. Dia. H of Tapered Hole at Length R1
    		6.78 mm

    Min. Dist. Hole C/L to Edge
    		5.72 mm

    Standard Material
    		300 Series Stainless Steel

    Standard Finish
    		Passivated and/or tested per ASTM A380

    CAD Supplier
    		PennEngineering® PEM®
    1 Draft hole performance will vary greatly depending on length of engagement of the knurl over the installed length. For best results, recommend use of 3 degree or less total draft and design hole as close to H as possible at depth R to optimize length and depth of knurl engagement.



     DOWNLOADS 

    CK™ Press-In Inserts For Castings And Soft Metals
    (PDF, 1047KB)