Part Search
Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    PEM® CASTSERT™ Press-in Inserts - Metric
PennEngineering
All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT™ Press-in Inserts - Metric > View Items  

PEM® CASTSERT™ Press-in Inserts - Metric

 
Check up to five results to perform an action.


For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.


  • Designed for flush installation with flat punch and anvil into blind holes or thru-holes
  • Process cost savings vs. coil inserts or thread tapping
  • Installed into drilled holes or as-cast holes with low draft angle
  • Pilot for rapid seating and self-alignment
  • Symmetric for auto-feed capability

    • Fastener drawings and models are available at www.pemnet.com



        Download PDF Download PDF   
        border="0" Printable Page  
        Email Email This Page  
        Save To Favorites Save To Favorites
      
    Compare Items
    		   
      Results 1 - 10 of 10 1 

    Part #

    Thread Size x Pitch

    Type

    Length A ±0.13

    After Knurl E (Nom.)

    Standard Material

    Standard Finish

    CAD
    CKS-M2.5-1 M2.5 x 0.45 CKS 3.18 mm 4.98 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M2.5-2 M2.5 x 0.45 CKS 6.35 mm 4.98 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M3-1 M3 x 0.5 CKS 4.45 mm 5.79 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M3-2 M3 x 0.5 CKS 7.62 mm 5.79 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M4-1 M4 x 0.7 CKS 6.35 mm 7.49 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M4-2 M4 x 0.7 CKS 12.07 mm 7.49 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M5-1 M5 x 0.8 CKS 7.62 mm 9.09 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M5-2 M5 x 0.8 CKS 13.34 mm 9.09 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M6-1 M6 x 1 CKS 9.53 mm 11.48 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
    CKS-M6-2 M6 x 1 CKS 15.88 mm 11.48 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
      Results 1 - 10 of 10 1