Registered Users – Sign In
 
Search Catalog
        
 All Categories    High-Tensile Strength Studs - Types HFG8™, HF109™ - Unified
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Studs and Pins for Sheet Metal > High Tensile Strength Studs, Non Flush – Types HF109, HFG8 > High-Tensile Strength Studs - Types HFG8™, HF109™ - Unified > View Items  

High-Tensile Strength Studs - Types HFG8™, HF109™ - Unified

 
Check up to five results to perform an action.


PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

HFH (heavy-duty) Studs replace weld studs with easier installation at lower costs. The large stud head which projects above the sheet material distributes the axial tightening force over a large area thereby improving pull through resistance.

HFG8 and HF109 (heavy-duty high tensile strength) Studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities.
  • Types HFG8 and HF109 are for heavy-duty applications in sheets as thin as .040”.
  • Grade 8 and property class 10.9 studs meeting 150 ksi/1040 MPa minimum.
  • Recommended for use in steel or HSLA steel sheets HRB (Rockwell “B” Scale) 89 or less and HB (Hardness Brinell) 180 or less.
  • Large head diameter spreads compressive stress on panel.
To be sure that you are getting genuine PEM products, look for the PEM stamp. Studs within the size range of the SAE and ISO specs are also identified with the Grade 8 and 10.9 head markings respectively.

Thread size #10-32 does not have SAE head marking since it is technically not within the size range of the specification.



    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

 MORE IMAGES 

·  HFG8_Installed

   
  Results 1 - 8 of 8 1 

Part #

Thread Size

Hole Size in Sheet + .005 - .000

L - Length ± .015

H ± .01

S Max.

Fastener Material

Standard Finish

CAD
HFG8-032-8ZI .190-32 (#10-32) .190 in .500 in .391 in .105 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-0420-8ZI .250-20 (1/4-20) .250 in .500 in .507 in .125 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-032-12ZI .190-32 (#10-32) .190 in .750 in .391 in .105 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-0420-12ZI .250-20 (1/4-20) .250 in .750 in .507 in .125 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-0518-12ZI .313-18 (5/16-18) .312 in .750 in .645 in .140 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-032-16ZI .190-32 (#10-32) .190 in 1.00 in .391 in .105 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-0420-16ZI .250-20 (1/4-20) .250 in 1.00 in .507 in .125 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
HFG8-0518-16ZI .313-18 (5/16-18) .312 in 1.00 in .645 in .140 in Heat-Treated Medium Carbon Alloy Steel Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless CAD Icon (for items table)
  Results 1 - 8 of 8 1