Registered UsersSign In
Search Catalog
      GO   
 All Categories    PEM® CASTSERT™ Press-in Inserts - Unified
PennEngineering
All Categories > PEM® Press-in Inserts for Castings > PEM® CASTSERT™ Press-in Inserts - Unified > View Items  

PEM® CASTSERT™ Press-in Inserts - Unified

Check up to five results to perform an action.

For Castings and Soft Metals HRB 70 / HB 125 or less

PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.


  • Designed for flush installation with flat punch and anvil into blind holes or thru-holes
  • Process cost savings vs. coil inserts or thread tapping
  • Installed into drilled holes or as-cast holes with low draft angle
  • Pilot for rapid seating and self-alignment
  • Symmetric for auto-feed capability

  • Fastener drawings and models are available at www.pemnet.com






        Download PDF Download PDF   
        border="0" Printable Page  
        Email Email This Page  
        Save To Favorites Save To Favorites
      
    Compare Items
       
      Results 1 - 12 of 12 1 

    Part #

    Thread Size

    Type

    Length A ±.005

    After Knurl E (Nom.)

    Standard Material

    Standard Finish

    CAD

    CKS-256-1 .086-56 (#2-56) CKS .125 in .196 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-256-2 .086-56 (#2-56) CKS .250 in .196 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-440-1 .112-40 (#4-40) CKS .175 in .228 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-440-2 .112-40 (#4-40) CKS .300 in .228 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-632-1 .138-32 (#6-32) CKS .200 in .259 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-632-2 .138-32 (#6-32) CKS .375 in .259 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-832-1 .164-32 (#8-32) CKS .250 in .295 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-832-2 .164-32 (#8-32) CKS .475 in .295 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-032-1 .190-32 (#10-32) CKS .300 in .358 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-032-2 .190-32 (#10-32) CKS .525 in .358 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-0420-1 .250-20 (1/4-20) CKS .375 in .452 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
    CKS-0420-2 .250-20 (1/4-20) CKS .625 in .452 in 300 Series Stainless Steel Passivated and/or tested per ASTM A360 CAD Icon (for items table)
      Results 1 - 12 of 12 1