Catalog
Type SH™ Hard Panel Nuts - Metric
Hard Panel Nuts - Type SH™
- Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
- Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
- Addresses environmental concerns
- Smaller outer diameter
- Lighter weight
- Flush on reverse side of panel
- Close to edge of panel mounting
- No embossing required
- Hardened nut material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Part # |
Thread Size x Pitch |
A (Shank) Max. |
Hole Size in Sheet + 0.08 |
E ± 0.25 |
Fastener Material |
CAD |
|---|---|---|---|---|---|---|
| SH-M6-1X | Thread Size x Pitch N/A M6 x 1 | A (Shank) Max. N/A 1.38 mm | Hole Size in Sheet + 0.08 N/A 8.75 mm | E ± 0.25 N/A 11.18 mm | Fastener Material N/A Hardened Alloy Steel |
CAD
N/A 
|
| SH-M6-2X | Thread Size x Pitch N/A M6 x 1 | A (Shank) Max. N/A 2.21 mm | Hole Size in Sheet + 0.08 N/A 8.75 mm | E ± 0.25 N/A 11.18 mm | Fastener Material N/A Hardened Alloy Steel |
CAD
N/A
|
| SH-M8-1X | Thread Size x Pitch N/A M8 x 1.25 | A (Shank) Max. N/A 1.38 mm | Hole Size in Sheet + 0.08 N/A 10.5 mm | E ± 0.25 N/A 12.70 mm | Fastener Material N/A Hardened Alloy Steel |
CAD
N/A
|
| SH-M8-2X | Thread Size x Pitch N/A M8 x 1.25 | A (Shank) Max. N/A 2.21 mm | Hole Size in Sheet + 0.08 N/A 10.5 mm | E ± 0.25 N/A 12.70 mm | Fastener Material N/A Hardened Alloy Steel |
CAD
N/A
|
| SH-M10-1X | Thread Size x Pitch N/A M10 x 1.50 | A (Shank) Max. N/A 2.21 mm | Hole Size in Sheet + 0.08 N/A 14 mm | E ± 0.25 N/A 17.35 mm | Fastener Material N/A Hardened Alloy Steel |
CAD
N/A
|
