PennEngineering - PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets - Unified

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets
Designed for use in harder sheets, hardness HRC 37/HB 340 or less

Installs flush into half hard .008” / 0.2mm stainless steel sheets
Installs into round holes without any special mounting hole preparation, eliminating adhesives and laser welding
Allows for light weighting and optimizing designs
Can be installed automatically.

Unit of Measure

Items	TMSO4-080-094 PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified	TMSO4-080-125 PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified	TMSO4-256-094 PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified	TMSO4-256-125 PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified
Thread Size	N/A .060-80 (#0-80)	N/A .060-80 (#0-80)	N/A .086-56 (#2-56)	N/A .086-56 (#2-56)
Min. Sheet Thickness	N/A .008 in
Hole Size in Sheet +.002 - .000	N/A .128 in	N/A .128 in	N/A .158 in	N/A .158 in
C Max.	N/A .125 in	N/A .125 in	N/A .156 in	N/A .156 in
H Nom.	N/A .159 in	N/A .159 in	N/A .189 in	N/A .189 in
L +.002 -.003	N/A .094 in	N/A .125 in	N/A .094 in	N/A .125 in
Min. Dist. Hole C/L to Edge	N/A .125 in	N/A .125 in	N/A .170 in	N/A .170 in
Anvil Chamfer Dia. A	N/A .115-.114 in	N/A .115-.114 in	N/A .142-.144 in	N/A .142-.144 in
Anvil Length	N/A .219 in	N/A .250 in	N/A .219 in	N/A .250 in
Thread Specification	N/A ASME B1.1, 2B
Fastener Material	N/A Hardened 400 Series Stainless Steel
Standard Finish	N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness¹	N/A HRC 37 / HB 340
CAD Supplier	N/A PennEngineering® (PEM®)
Pitch	N/A
PHH	N/A 0.075 in	N/A 0.075 in	N/A 0.100 in	N/A 0.100 in
¹ HRC - Hardness Rockwell “C” Scale. HB - Hardness Brinell