Catalog

Photo of PEM products being manufactured
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Search by Specification
Unit of Measure
Items
Captive screws, surface mount -assembly

ReelFast® Panel Fastener Assembly - Type PSHP - Unified
Captive screws, surface mount -assembly

ReelFast® Panel Fastener Assembly - Type PSHP - Unified
Captive screws, surface mount -assembly

ReelFast® Panel Fastener Assembly - Type PSHP - Unified
Captive screws, surface mount -assembly

ReelFast® Panel Fastener Assembly - Type PSHP - Unified
Captive screws, surface mount -assembly

ReelFast® Panel Fastener Assembly - Type PSHP - Unified
Description N/A
  • Simply snap screw into retainer to complete assembly, spring action of plastic “fingers” holds screw in retracted position
  • Lobed Black ABS Cap standard
  • Other molded-thru colors available on special order
  • If you require a custom color or yo
Thread Size N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .138-32 (#6-32)
Cap Color1 N/A
Black (standard) #001
CAD View N/A Retracted N/A Fastened N/A Retracted N/A Fastened N/A Retracted
C ± .010
N/A .440 in PSHP.jpg
E ± .010 N/A .542 in
G ± .025 N/A .188 in N/A .188 in N/A .248 in N/A .248 in N/A .188 in
L ± .015 N/A .510 in N/A .510 in N/A .570 in N/A .570 in N/A .510 in
P ± .025 N/A .000 in N/A .000 in N/A .026 in N/A .026 in N/A .000 in
T Nom. N/A .663 in N/A .663 in N/A .723 in N/A .723 in N/A .663 in
T1 Nom. N/A .478 in
T2 Nom. N/A .646 in
Total Radial Float N/A .015 N/A .015 N/A .015 N/A .015 N/A .020
Driver Size N/A #1 Phillips N/A #1 Phillips N/A #1 Phillips N/A #1 Phillips N/A #2 Phillips
For Use in Sheet Hardness N/A NOT APPLICABLE
Thread Specification2 N/A External, ANSI B1.1, 2A
Cap Material N/A ABS. Temperature limit is 200° F / 93° C
Screw Material N/A Carbon Steel
Screw Finish N/A Bright Nickel over Copper Flash per ASTM B689, Type II
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 The colors codes #002 thru #007 are non-stocked standards and available on special order
  • 2 As with all Class 2A/6g external threads with an additive finish, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.