CAD (0)
  • Cart is empty
  • Self-clinching mounting design provides high pushout resistance.
  • Installs flush on back side of panel.
  • Does not require special hole preparation.
Unit of Measure
Items
PF7M

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Unified Type PF7M

PF7M

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Unified Type PF7M

PF7M

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Unified Type PF7M

PF7M

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Unified Type PF7M

PF7M

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Unified Type PF7M
Thread Size N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .112-40 (#4-40) N/A .138-32 (#6-32)
Type N/A PF7M
Thread Code N/A 440 N/A 440 N/A 440 N/A 440 N/A 632
Screw Length Code N/A 0 N/A 0 N/A 1 N/A 1 N/A 0
A (Shank) Max.
N/A .036 in Captive-Panel-Screw--Screw-Head--Spring-loaded--Self-Clinching-PF7M---2.jpg
Min. Sheet Thickness N/A .036 in
Hole Size in Sheet + 0.003 - 0.000 N/A .219 in N/A .219 in N/A .219 in N/A .219 in N/A .250 in
C Max. N/A .218 in N/A .218 in N/A .218 in N/A .218 in N/A .249 in
E ± .010 N/A .310 in N/A .310 in N/A .310 in N/A .310 in N/A .342 in
G ± .025 N/A .210 in N/A .210 in N/A .270 in N/A .270 in N/A .240 in
H ± .010 N/A .100 in
P ± .025 N/A .000 in N/A .000 in N/A .065 in N/A .065 in N/A .000 in
T1 Nom. N/A .38 in N/A .38 in N/A .38 in N/A .38 in N/A .410 in
T2 Nom. N/A .55 in N/A .55 in N/A .55 in N/A .55 in N/A .610 in
Min. Dist. Hole C/L to Edge N/A .28 in N/A .28 in N/A .28 in N/A .28 in N/A .290 in
Thread Specification1 N/A ASME B1.1, 2A
Material Retainer N/A Carbon Steel
Material Screw N/A Heat-Treated Carbon Steel
Material Spring N/A 300 Series Stainless Steel
Finish Retainer N/A Bright nickel over copper flash
Finish Screw N/A Bright nickel over copper flash
Finish Spring N/A Natural Finish
For Use in Sheet Hardness N/A HRB 60 or Less (Hardness Rockwell “B” Scale) / HB 107 or Less (Hardness Brinell)
CAD View N/A Unfastened N/A Fastened N/A Unfastened N/A Fastened N/A Unfastened
CAD Supplier N/A PennEngineering® (PEM®)
PEM Part No. N/A
  • 1 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.