CAD (0)
  • Cart is empty
  • Self-clinching mounting design provides high pushout resistance.
  • Installs flush on back side of panel.
  • Does not require special hole preparation.
Unit of Measure
Items
PF7M Metric

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Metric Type PF7M

PF7M Metric

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Metric Type PF7M

PF7M Metric

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Metric Type PF7M

PF7M Metric

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Metric Type PF7M

PF7M Metric

Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching - Metric Type PF7M
Thread Size N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M3 x 0.5 N/A M4 x 0.7
Type N/A PF7M
Thread Code N/A M3 N/A M3 N/A M3 N/A M3 N/A M4
Screw Length Code N/A 0 N/A 0 N/A 1 N/A 1 N/A 0
A (Shank) Max.
N/A 0.92 mm Captive-Panel-Screw--Screw-Head--Spring-loaded--Self-Clinching-PF7M---2.jpg
Min. Sheet Thickness N/A 0.92 mm
Hole Size in Sheet + 0.08 N/A 5.56 mm N/A 5.56 mm N/A 5.56 mm N/A 5.56 mm N/A 7.92 mm
C Max. N/A 5.54 mm N/A 5.54 mm N/A 5.54 mm N/A 5.54 mm N/A 7.9 mm
E ± 0.25 N/A 7.87 mm N/A 7.87 mm N/A 7.87 mm N/A 7.87 mm N/A 10.29 mm
G ± 0.64 N/A 5.33 mm N/A 5.33 mm N/A 6.86 mm N/A 6.86 mm N/A 6.10 mm
H ± 0.25 N/A 2.5 mm N/A 2.5 mm N/A 2.5 mm N/A 2.5 mm N/A 3.00 mm
P ± 0.64 N/A 0 mm N/A 0 mm N/A 1.65 mm N/A 1.65 mm N/A 0 mm
T1 Nom. N/A 9.65 mm N/A 9.65 mm N/A 9.65 mm N/A 9.65 mm N/A 10.92 mm
T2 Nom. N/A 13.97 mm N/A 13.97 mm N/A 13.97 mm N/A 13.97 mm N/A 16.00 mm
Min. Dist. Hole C/L to Edge N/A 7.11 mm N/A 7.11 mm N/A 7.11 mm N/A 7.11 mm N/A 8.38 mm
Thread Specification1 N/A ASME B1.13M, 6g
Material Retainer N/A Carbon Steel
Material Screw N/A Heat-Treated Carbon Steel
Material Spring N/A 300 Series Stainless Steel
Finish Retainer N/A Bright nickel over copper flash
Finish Screw N/A Bright nickel over copper flash
Finish Spring N/A Natural Finish
For Use in Sheet Hardness N/A HRB 60 or Less (Hardness Rockwell “B” Scale) / HB 107 or Less (Hardness Brinell)
CAD View N/A Unfastened N/A Fastened N/A Unfastened N/A Fastened N/A Unfastened
CAD Supplier N/A PennEngineering® (PEM®)
E_INS N/A
PEM Part No. N/A
  • 1 As with all external plated threads, Class 2A/6g, the maximum major and pitch, after plating, may equal basic sizes and be gauged to Class 3A/4h, per ANSI B1.1, Section 8, Table 3A and ANSI B1.13M, Section 8, Paragraph 8.2.