CAD (0)
  • Cart is empty
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets
Designed for use in harder sheets, hardness HRC 37/HB 340 or less
  • Installs flush into half hard .008” / 0.2mm stainless steel sheets
  • Installs into round holes without any special mounting hole preparation, eliminating adhesives and laser welding
  • Allows for light weighting and optimizing designs
  • Can be installed automatically.
Unit of Measure
Items
TMSO4-Standoffs

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Metric

TMSO4-Standoffs

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Metric

TMSO4-Standoffs

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Metric

TMSO4-Standoffs

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Metric

TMSO4-Standoffs

PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Metric
Thread Size x Pitch N/A M1 x 0.25 N/A M1 x 0.25 N/A M1.2 x 0.25 N/A M1.2 x 0.25 N/A M1.4 x 0.3
Min. Sheet Thickness N/A 0.2 mm
Hole Size in Sheet + 0.05 N/A 2.24 mm N/A 2.24 mm N/A 2.59 mm N/A 2.59 mm N/A 2.87 mm
C Max.
N/A 2.18 mm TMSO4-Standoffs-dimensions.jpg N/A 2.18 mm TMSO4-Standoffs-dimensions.jpg N/A 2.51 mm TMSO4-Standoffs-dimensions.jpg N/A 2.51 mm TMSO4-Standoffs-dimensions.jpg N/A 2.79 mm TMSO4-Standoffs-dimensions.jpg
H Nom. N/A 2.97 mm N/A 2.97 mm N/A 3.39 mm N/A 3.39 mm N/A 3.67 mm
L +0.05 -0.08 N/A 2 mm N/A 3 mm N/A 2 mm N/A 3 mm N/A 2 mm
Min. Dist. Hole C/L to Edge N/A 2.64 mm N/A 2.64 mm N/A 2.85 mm N/A 2.85 mm N/A 2.87 mm
Anvil Chamfer Dia. A N/A 2.84-2.89 mm
Anvil Length N/A 5.18 mm N/A 6.18 mm N/A 5.18 mm N/A 6.18 mm N/A 5.18 mm
Thread Specification N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 5H N/A Metric ISO 68-1, 6H
Fastener Material N/A Hardened 400 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness1 N/A HRC 37/ HB 340
CAD Supplier N/A PennEngineering® (PEM®)
Pitch N/A
  • 1 HRC - Hardness Rockwell “C” Scale. HB - Hardness Brinell