CAD (0)
  • Cart is empty
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

FH (flush-head) studs are available in aluminum, steel, ormore
Unit of Measure

Pin Dia. Code

160

Length Code

4

Min. Sheet Thickness

.040 in

Hole Size in Sheet + .003 - .000

.189 in
P - Nominal Pin Diameter ± .0021
.160 in
a1380.jpg

L - Length ± .015

.250 in

H ± .015

.260 in
S Max.2 .100 in

Min. Dist. Hole C/L to Edge

.28 in

For Use in Sheet Hardness

HRB 80 / HB 150 or less

Fastener Material

Heat-Treated Carbon Steel

Standard Finish

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

PennEngineering® (PEM®)
  • 1 Other pin diameters can be specified.
  • 2 Pin diameter may exceed max. in this region.