Catalog

CAD (0)
▾
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.
Features and Benefits
Features and Benefits
- Installs into sheets as thin as .024” / 0.6mm.
- Can be used to attach dissimilar materials.
- Can be installed into most panel materials, including stainless steel and rigid non-metallic more
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.
Features and Benefits
Features and Benefits
- Installs into sheets as thin as .024” / 0.6mm.
- Can be used to attach dissimilar materials.
- Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
- Allows for close centerline-to-edge distance.
- Corrosion resistant.
- RoHS compliant.
Unit of Measure
Thread Size |
N/A M6 x 1 |
Material Code |
N/A SGPC |
Thread Code |
N/A M6 |
L - Length ± 0.4 |
N/A
15 mm
![]() Loading zoom |
Sheet Thickness1 | N/A 0.6 to 1.2 mm |
Hole Size in Sheet + 0.08 |
N/A 7.5 mm |
Hole Dia. of Attached Panel |
N/A 8.30 mm |
H ± 0.25 |
N/A 9 mm |
S Max.2 | N/A 3.0 mm |
T ± 0.1 |
N/A 0.7 mm |
Min. Dist. Hole C/L to Edge |
N/A 6.2 mm |
Fastener Material |
N/A 300 Series Stainless Steel |
Standard Finish |
N/A Passivated and/or tested per ASTM A380 |
For Use in Sheet Hardness |
N/A Any |
CAD Supplier |
N/A PennEngineering® (PEM®) |
- 1 See installation data for tooling requirements. Contact Technical Support (techsupport@pemnet.com) for other thicknesses.
- 2 Threads are gageable to within 2 pitches on the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.