PennEngineering - Type SH™ Hard Panel Nuts - Metric - Compare Items

PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com

Print Back

Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
Allows overall weight reduction for all vehicles
Provides lower installed cost
Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm

Compare to other thin sheet fastening devices:

Addresses environmental concerns
Smaller outer diameter
Lighter weight
Flush on reverse side of panel
Close to edge of panel mounting
No embossing required
Hardened nut material provides stronger thread strength
Can be installed automatically using press or in-die technology

Type SH™ Hard Panel Nuts

Type SH™ Hard Panel Nuts_2

Unit of Measure

Items	SH-M6-1X Type SH™ Hard Panel Nuts - Metric	SH-M6-2X Type SH™ Hard Panel Nuts - Metric	SH-M8-1X Type SH™ Hard Panel Nuts - Metric	SH-M8-2X Type SH™ Hard Panel Nuts - Metric	SH-M10-1X Type SH™ Hard Panel Nuts - Metric
Description	N/A Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile) Allows overall weight reduction for all vehicles Provides lower installed cost Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm Compare to other thin sheet fastening devices: Addresses environmental concerns Smaller outer diameter Lighter weight Flush on reverse side of panel Close to edge of panel mounting No embossing required Hardened nut material provides stronger thread strength Can be installed automatically using press or in-die technology
Thread Size x Pitch	N/A M6 x 1	N/A M6 x 1	N/A M8 x 1.25	N/A M8 x 1.25	N/A M10 x 1.5
Thread Code	N/A M6	N/A M6	N/A M8	N/A M8	N/A M10
Shank Code	N/A 1	N/A 2	N/A 1	N/A 2	N/A 1
A (Shank) Max.	N/A 1.38 mm	N/A 2.21 mm	N/A 1.38 mm	N/A 2.21 mm	N/A 2.21 mm
Min. Sheet Thickness¹	N/A 1.4 mm	N/A 2.29 mm	N/A 1.4 mm	N/A 2.29 mm	N/A 2.29 mm
Hole Size in Sheet + 0.08	N/A 8.75 mm	N/A 8.75 mm	N/A 10.5 mm	N/A 10.5 mm	N/A 14 mm
C Max.	N/A 8.73 mm	N/A 8.73 mm	N/A 10.47 mm	N/A 10.47 mm	N/A 13.97 mm
E ± 0.25	N/A 11.18 mm	N/A 11.18 mm	N/A 12.7 mm	N/A 12.7 mm	N/A 17.35 mm
T ± 0.25	N/A 4.08 mm	N/A 4.08 mm	N/A 5.47 mm	N/A 5.47 mm	N/A 7.48 mm
Min. Dist. Hole C/L to Edge	N/A 8.6 mm	N/A 8.6 mm	N/A 9.7 mm	N/A 9.7 mm	N/A 13.5 mm
For Use in Sheet Hardness²	N/A HRC 30 / HB 277 or Less
Thread Specification	N/A Internal, ASME B1.1, 2B / ASME B1.13M, 6H
Fastener Material	N/A Hardened Alloy Steel
Standard Finish³	N/A No Finish (with Rust Preventative Oil)
Optional Finish	N/A Consult technical support for recommended optional finishes.
CAD Supplier	N/A PennEngineering® (PEM®)
¹ For maximum performance, we recommend that you use the maximum shank length for your sheet thickness. ² HRC - Hardness Rockwell "C" Scale. HB - Hardness Brinell. ³ Unplated threads are sized to accept a basic go gauge after .00025 in plating.