Print Back
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.

SK4F™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.

  • Allow detachable spacing of two sheets
  • Clinch feature mounts fastener permanently and flush into metal sheet
  • Unique barrel design allows for quick attachment and detachment
  • Makes horizontal or vertical component mounting possible
  • SK4F™ standoffs are available for installation into stainless steel sheets
SKCF_SK4F_SKSF
SKCF_SK4F_SKSF_Dim
Unit of Measure
Items SKCF_SK4F_SKSF
SK4F-61.5-4
SELF-CLINCHING KEYHOLE® FASTENERS - SK4F™ - Metric
SKCF_SK4F_SKSF
SK4F-61.5-6
SELF-CLINCHING KEYHOLE® FASTENERS - SK4F™ - Metric
SKCF_SK4F_SKSF
SK4F-61.5-8
SELF-CLINCHING KEYHOLE® FASTENERS - SK4F™ - Metric
SKCF_SK4F_SKSF
SK4F-61.5-10
SELF-CLINCHING KEYHOLE® FASTENERS - SK4F™ - Metric
Panel 1 (Bottom) Sheet Thickness Min. N/A 1.02 mm
Panel 1 (Bottom) Mounting Hole B + 0.08 N/A 5.41 mm
Panel 2 (Top) Thickness Range N/A 1.45 to 1.62 mm
Panel 2 (Top) Mounting Hole A1 Nom. N/A 1.5 mm
Panel 2 (Top) Mounting Hole A2 ± 0.08 N/A 3 mm
Panel 2 (Top) Mounting Hole A3 ± 0.08 N/A 5 mm
Panel 2 (Top) Mounting Hole A4 Min. N/A 3.75 mm a1326.jpg
Panel 1 (Bottom) Sheet Hardness Max.1 N/A HRB 88 / HB 183
Panel 2 (Top) Material N/A Any
A ± 0.08 N/A 2.51 mm a1323.jpg
B ± 0.08 N/A 4.5 mm
C Max. N/A 5.39 mm
D Anvil Hole + 0.08 N/A 5.39 mm
H Nom. N/A 6.35 mm
L - Length ± 0.13 N/A 4 mm N/A 6 mm N/A 8 mm N/A 10 mm
M Max. N/A 2.75 mm
S ± 0.08 N/A 1.73 mm
Panel 1 (Bottom) Edge Distance C1 Min. N/A 6.60 mm a1324.jpg
Panel 1 (Bottom) Location Tolerance Max. N/A ±.130 in
Panel 2 (Top) Edge Distance C2 Min. N/A 4.1 mm
Standard Material N/A 400 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.