Print Back
For attachment of thin sheets to plastics, common casting materials and other similar base materials. Also available in micro sizes, which are ideal for compact electronics.

Features and Benefits
  • Secure sheets to common magnesium die casting materials such as AZ91D. Also appropriate for attaching panels to plastics such as ABS.
  • Alternative to screws, eliminating the need to tap or use threaded inserts.
  • Tapered tip for easier alignment into base panel.
  • Top sheet can be any material.
  • Low-profile head.
  • Simple, press-in installation. Does not require heat or ultrasonics.
  • Can be installed automatically.
  • TackSert® Pins
    TackSert® Pins
    Unit of Measure
    Items TackSert® Pins
    TKA-10-100
    microPEM® TackSert™ Type TK™ Pins
    TackSert® Pins
    TKA-10-150
    microPEM® TackSert™ Type TK™ Pins
    TackSert® Pins
    TKA-10-200
    microPEM® TackSert™ Type TK™ Pins
    TackSert® Pins
    TKA-10-250
    microPEM® TackSert™ Type TK™ Pins
    TackSert® Pins
    TKA-10-300
    microPEM® TackSert™ Type TK™ Pins
    Type N/A TKA
    Base Panel Hole Size Code N/A 10
    Length Code N/A 100 N/A 150 N/A 200 N/A 250 N/A 300
    Top Sheet Hole Size N/A 0.051 in ±.002 in 1.3 mm ±0.05 mm
    Base Panel Hole Size N/A 0.039 in -.002 in 1 mm -0.05 mm
    Top Sheet Thickness N/A 0.2 mm.008 in N/A 0.7 mm.028 in N/A 1.2 mm.047 in N/A 1.7 mm.067 in N/A 2.2 mm.087 in
    C Max. N/A 1.2 mm.047 in TK-Dwg-800x600.jpg
    H N/A 0.071 in ±.003 in 1.8 mm ±0.08 mm
    L N/A 0.039 in ±.002 in 1 mm ±0.06 mm N/A 0.059 in ±.002 in 1.5 mm ±0.06 mm N/A 0.079 in ±.002 in 2 mm ±0.06 mm N/A 0.098 in ±.002 in 2.5 mm ±0.06 mm N/A 0.118 in ±.002 in 3 mm ±0.06 mm
    T N/A 0.011 in ±.003 in 0.27 mm ±0.08 mm
    Min. Dist. Hole C/L to Edge1 N/A 1.18 mm.047 in
    Material N/A Aluminum
    Standard Finish N/A Plain
    For use in N/A P.C. Board and Plastics
    For Use in Sheet Hardness N/A
    CAD Supplier N/A
    • 1 Minimum boss diameter is twice centerline-to-edge value.