Print Back
PR10 Self-Clinching Flush-Mounted Retainers
PR10 Self-Clinching Flush-Mounted Retainers 2
Unit of Measure
Items PR10 Self-Clinching Flush-Mounted Retainers
PR10-440
PR10 Self-Clinching Flush-Mounted Retainers - Unified
PR10 Self-Clinching Flush-Mounted Retainers
PR10-632
PR10 Self-Clinching Flush-Mounted Retainers - Unified
PR10 Self-Clinching Flush-Mounted Retainers
PR10-832
PR10 Self-Clinching Flush-Mounted Retainers - Unified
PR10 Self-Clinching Flush-Mounted Retainers
PR10-032
PR10 Self-Clinching Flush-Mounted Retainers - Unified
Thread Size N/A .112-40 (#4-40) N/A .138-32 (#6-32) N/A .164-32 (#8-32) N/A .190-32 (#10-32)
Type1 N/A PR10
Thread Code N/A 440 N/A 632 N/A 832 N/A 032
A (Shank) Max. N/A .125 in a1280.jpg
Min. Sheet for Self-Clinching N/A .050 in
Min. Sheet for Flush Installation N/A .125 in
Hole Size in Sheet + 0.003 - 0.000 N/A .281 in N/A .312 in N/A .344 in N/A .375 in
B Nom. N/A .195 in N/A .225 in N/A .255 in N/A .290 in
C Max. N/A .280 in N/A .311 in N/A .343 in N/A .374 in
E Nom. N/A .310 in N/A .340 in N/A .370 in N/A .41 in
H Nom. N/A .075 in
Min. Dist. Hole C/L to Edge N/A .310 in N/A .330 in N/A .34 in N/A .360 in
Thread Specification N/A ANSI B1.1, 2B
Material N/A 300 Series Stainless Steel
Finish N/A Passivated and/or Tested per ASTM A380
For Use in Sheet Hardness N/A HRB 70 or Less (Hardness Rockwell “B” Scale) / HB 125 or Less (Hardness Brinell)
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 2B (unified) and 6H (metric) go gauge may stop at pilot end but class 3A (unified) and 4h (metric) screws will pass through with finger torque.