Print Back
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs for Thin Sheets
Designed for use in harder sheets, hardness HRC 37/HB 340 or less
  • Installs flush into half hard .008” / 0.2mm stainless steel sheets
  • Installs into round holes without any special mounting hole preparation, eliminating adhesives and laser welding
  • Allows for light weighting and optimizing designs
  • Can be installed automatically.
TMSO4-Standoffs
TMSO4-Standoffs dimensions
Unit of Measure
Items TMSO4-Standoffs
TMSO4-080-094
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified
TMSO4-Standoffs
TMSO4-080-125
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified
TMSO4-Standoffs
TMSO4-256-094
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified
TMSO4-Standoffs
TMSO4-256-125
PEM® Type TMSO4™ Self-clinching microPEM® Standoffs - Unified
Thread Size N/A .060-80 (#0-80) N/A .060-80 (#0-80) N/A .086-56 (#2-56) N/A .086-56 (#2-56)
Min. Sheet Thickness N/A .008 in
Hole Size in Sheet +.002 - .000 N/A .128 in N/A .128 in N/A .158 in N/A .158 in
C Max. N/A .125 in TMSO4-Standoffs-dimensions.jpg N/A .125 in TMSO4-Standoffs-dimensions.jpg N/A .156 in TMSO4-Standoffs-dimensions.jpg N/A .156 in TMSO4-Standoffs-dimensions.jpg
H Nom. N/A .159 in N/A .159 in N/A .189 in N/A .189 in
L +.002 -.003 N/A .094 in N/A .125 in N/A .094 in N/A .125 in
Min. Dist. Hole C/L to Edge N/A .125 in N/A .125 in N/A .170 in N/A .170 in
Anvil Chamfer Dia. A N/A .115-.114 in N/A .115-.114 in N/A .142-.144 in N/A .142-.144 in
Anvil Length N/A .219 in N/A .250 in N/A .219 in N/A .250 in
Thread Specification N/A ASME B1.1, 2B
Fastener Material N/A Hardened 400 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness1 N/A HRC 37 / HB 340
CAD Supplier N/A PennEngineering® (PEM®)
Pitch N/A
PHH N/A 0.075 in N/A 0.075 in N/A 0.100 in N/A 0.100 in
  • 1 HRC - Hardness Rockwell “C” Scale. HB - Hardness Brinell