Print Back
PEM® TY-D® self-clinching tie-mounts provide secure attachment points for mounting wires to electronic chassis or enclosures. TY-D hardware installs quickly and permanently without screws and eliminates the use of adhesives that typically fail over time and temperature cycling.

TY-D hardware can be a great improvement over traditional mounting methods. They can be placed with assurance at designed locations and angles to remain secure for the life of the assembly; they will not protrude on the reverse side and will not affect the reverse side appearance or clearance; and panels remain flush, minimizing EMI/RFI and contamination of electronics by dust or dirt.
Standard tie-mount – TD
Self-Clinching-TY-D-Cable-Tie-Mounts-2
Unit of Measure
Items Standard tie-mount – TD
TDS-40-4
Self-Clinching TY-D®Cable Tie-Mounts - Unified Type TD
Standard tie-mount – TD
TDS-60-6
Self-Clinching TY-D®Cable Tie-Mounts - Unified Type TD
Standard tie-mount – TD
TDS-175-12
Self-Clinching TY-D®Cable Tie-Mounts - Unified Type TD
Standard tie-mount – TD
TDS-40-4ZI
Self-Clinching TY-D®Cable Tie-Mounts - Unified Type TD
Standard tie-mount – TD
TDS-60-6ZI
Self-Clinching TY-D®Cable Tie-Mounts - Unified Type TD
Type N/A TDS
Profile1 N/A 40 N/A 60 N/A 175 N/A 40 N/A 60
Length Code N/A 4 N/A 6 N/A 12 N/A 4 N/A 6
L - Length ± .003 N/A .121 in Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A .184 in Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A .371 in Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A .121 in Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG N/A .184 in Self-Clinching-TY-D-Cable-Tie-Mounts-2.JPG
Sheet Thickness N/A .040 - .050 in N/A .040 - .070 in N/A .040 - .125 in N/A .040 - .050 in N/A .040 - .070 in
Hole Size In Sheet + .002 -.001 N/A .250 x .125 in N/A .312 x .187 in N/A .500 x .375 in N/A .250 x .125 in N/A .312 x .187 in
A ± .003 N/A .246 in N/A .308 in N/A .496 in N/A .246 in N/A .308 in
B ± .006 N/A .055 in N/A .075 in N/A .130 in N/A .055 in N/A .075 in
C ± .006 N/A .065 in N/A .065 in N/A .095 in N/A .065 in N/A .065 in
D ± .006 N/A .160 in N/A .205 in N/A .360 in N/A .160 in N/A .205 in
E ± .006 N/A .308 in N/A .370 in N/A .562 in N/A .308 in N/A .370 in
G - Height ± .006 N/A .150 in N/A .180 in N/A .285 in N/A .150 in N/A .180 in
Min. Hole Edge to Sheet Edge K N/A .040 in
Min. Hole Edge to Sheet Edge M N/A .147 in N/A .196 in N/A .262 in N/A .147 in N/A .196 in
Standard Material N/A 17-4 Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380 N/A Passivated and/or tested per ASTM A380 N/A Passivated and/or tested per ASTM A380 N/A Zinc plated 8µm, Colorless, over Nickel Strike N/A Zinc plated 8µm, Colorless, over Nickel Strike
Max. Panel Hardness N/A HRB 70 / HB 125 OR LESS
  • 1 Reference to typical load rating (in pounds) for appropriate size nylon cable tie.