Print Back
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.

Features and Benefits
  • Installs into sheets as thin as .024” / 0.6mm.
  • Can be used to attach dissimilar materials.
  • Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
  • Allows for close centerline-to-edge distance.
  • Corrosion resistant.
  • RoHS compliant.
Swaging Collar Studs, Non Flush - Type SGPC
Swaging Collar Studs, Non Flush - Type SGPC 2
Unit of Measure
Items Swaging Collar Studs, Non Flush - Type SGPC
SGPC-256-5
Swaging Collar Studs, Non Flush - Type SGPC ™ - Unified
Swaging Collar Studs, Non Flush - Type SGPC
SGPC-440-5
Swaging Collar Studs, Non Flush - Type SGPC ™ - Unified
Swaging Collar Studs, Non Flush - Type SGPC
SGPC-632-5
Swaging Collar Studs, Non Flush - Type SGPC ™ - Unified
Swaging Collar Studs, Non Flush - Type SGPC
SGPC-832-5
Swaging Collar Studs, Non Flush - Type SGPC ™ - Unified
Swaging Collar Studs, Non Flush - Type SGPC
SGPC-032-5
Swaging Collar Studs, Non Flush - Type SGPC ™ - Unified
Thread Size N/A .086-56 (#2-56) N/A .112-40 (#4-40) N/A .138-32 (#6-32) N/A .164-32 (#8-32) N/A .190-32 (#10-32)
Material Code N/A SGPC
Thread Code N/A 256 N/A 440 N/A 632 N/A 832 N/A 032
L - Length ± .015 N/A .312 in SGPC-Dwg.jpg
Sheet Thickness1 N/A .024 to .047 in
Hole Size in Sheet + .003 - .000 N/A .145 in N/A .171 in N/A .196 in N/A .223 in N/A .249 in
Hole Dia. of Attached Panel + .005 - .000 N/A .182 in N/A .205 in N/A .229 in N/A .259 in N/A .280 in
H ± .010 N/A .189 in N/A .228 in N/A .256 in N/A .279 in N/A .307 in
S Max.2 N/A .093 in N/A .101 in N/A .109 in N/A .109 in N/A .109 in
T ± .004 N/A 0.02 in N/A .024 in N/A .024 in N/A .024 in N/A .024 in
Min. Dist. Hole C/L to Edge N/A .130 in N/A .160 in N/A .180 in N/A .20 in N/A .210 in
Fastener Material N/A 300 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness N/A Any
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 See installation data for tooling requirements. Contact Technical Support (techsupport@pemnet.com) for other thicknesses.
  • 2 Threads are gageable to within 2 pitches on the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.