Print Back
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove - creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

HFE (heavy-duty) Studs are designed with an enlarged head diametermore
Unit of Measure

Specifications

Thread Size x Pitch

M5 x 0.8

Thread Code

M5

Length Code

40

Min. Sheet Thickness

1.0 mm

Hole Size in Sheet + 0.13

5 mm

L - Length ± 0.4

40 mm a1378.jpg

H ± 0.25

9.6 mm
S Max.1 2.6 mm

T Max.

1.35 mm

Max. Hole in Attached Parts

7.3 mm

Min. Dist. Hole C/L to Edge

10 mm

Thread Strength

900 MPa

For Use in Sheet Hardness

HRB 85 / HB 165 or Less

Thread Specification

External, ASME B1.13M, 6g

Fastener Material

Heat-Treated Carbon Steel

Standard Finish

Zinc plated per ASTM B633, SC1 (5µm), Type III, colorless

CAD Supplier

PennEngineering® (PEM®)
  • 1 Threads are gageable to within 2 pitches of the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.