PennEngineering
PennEngineering
Corporate Headquarters – Danboro, PA
5190 Old Easton Rd.
Danboro, PA 18916
Phone: 215-766-8853
Toll-Free Phone: 1-800-237-4736 (U.S. only)
Email: info@pemnet.com
Website: www.pemnet.com
Print Back
Type CLA aluminum nuts are recommended for use in aluminum sheet with a hardness of HRB 50 or less on the Rockwell “B” scale.

Unplated threads are sized to accept a basic go gauge after .00025” plating.
Unit of Measure

Specifications

Thread Size x Pitch

 N/A M5 x 0.8

Thread Code

 N/A M5

Shank Code

 N/A 2

A (Shank) Max.

 N/A 1.38 mm CLA-Dwg.jpg
Min. Sheet Thickness1 N/A 1.4 mm

Hole Size in Sheet + 0.08

 N/A 7.52 mm

C Max.

 N/A 7.49 mm

E ± 0.25

 N/A 9.4 mm

T ± 0.25

 N/A 3.80 mm
Min. Dist. Hole C/L to Edge2 N/A 7.9 mm
For Use in Sheet Hardness3 N/A HRB 50 / HB 82 or less

Thread Specification

 N/A Internal, ASME B1.13M, 6H

Fastener Material

 N/A Aluminum

Standard Finish

 N/A None
  • 1 For maximum performance, we recommend that you use the maximum shank length for your sheet thickness.
  • 2 To minimize sheet distortion and maximize product performance, use a centerline-to-edge value greater or equal to the value specified.
  • 3 HRB - Hardness Rockwell “B” Scale. HB - Hardness Brinell.