Print Back
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.

TPS, TP4 Pilot Pins satisfy a wide range of positioning, pivot,more
Unit of Measure

Specifications

Pin Dia. Code

187

Length Code

10

Min. Sheet Thickness

.040 in

Hole Size in Sheet + .003 - .000

.205 in

P - Pin Diameter ± .002

.187 in a1381.jpg

L - Length ± .015

.625 in

D ± .006

.132 in

H ± .015

.270 in
S Max.1 .090 in

Min. Dist. Hole C/L to Edge

.28 in

For Use in Sheet Hardness

HRB 70 / HB 125 or Less

Fastener Material

300 Series Stainless Steel

Standard Finish

Passivated and/or tested per ASTM A380

CAD Supplier

PennEngineering® (PEM®)
  • 1 Pin diameter may exceed max. in this region.