Catalog

Photo of PEM products being manufactured
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.

Features and Benefits
  • Installs into sheets as thin as .024” / 0.6mm.
  • Can be used to attach dissimilar materials.
  • Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
  • Allows for close centerline-to-edge distance.
  • Corrosion resistant.
  • RoHS compliant.
Search by Specification
Unit of Measure
Items
Swaging Collar Studs, Non Flush - Type SGPC

Swaging Collar Studs, Non Flush - Type SGPC ™ - Metric
Swaging Collar Studs, Non Flush - Type SGPC

Swaging Collar Studs, Non Flush - Type SGPC ™ - Metric
Swaging Collar Studs, Non Flush - Type SGPC

Swaging Collar Studs, Non Flush - Type SGPC ™ - Metric
Swaging Collar Studs, Non Flush - Type SGPC

Swaging Collar Studs, Non Flush - Type SGPC ™ - Metric
Swaging Collar Studs, Non Flush - Type SGPC

Swaging Collar Studs, Non Flush - Type SGPC ™ - Metric
Thread Size N/A M2.5 x 0.45 N/A M3 x 0.5 N/A M4 x 0.7 N/A M5 x 0.8 N/A M2.5 x 0.45
Material Code N/A SGPC
Thread Code N/A M2.5 N/A M3 N/A M4 N/A M5 N/A M2.5
L - Length ± 0.4
N/A 8 mm SGPC-Dwg.jpg N/A 8 mm SGPC-Dwg.jpg N/A 8 mm SGPC-Dwg.jpg N/A 8 mm SGPC-Dwg.jpg N/A 10 mm SGPC-Dwg.jpg
Sheet Thickness1 N/A 0.6 to 1.2 mm
Hole Size in Sheet + 0.08 N/A 4 mm N/A 4.5 mm N/A 5.5 mm N/A 6.5 mm N/A 4 mm
Hole Dia. of Attached Panel N/A 4.95 mm N/A 5.45 mm N/A 6.3 mm N/A 7.45 mm N/A 4.95 mm
H ± 0.25 N/A 5 mm N/A 6 mm N/A 7 mm N/A 8 mm N/A 5 mm
S Max.2 N/A 2.4 mm N/A 2.5 mm N/A 2.7 mm N/A 2.8 mm N/A 2.4 mm
T ± 0.1 N/A 0.5 mm N/A 0.6 mm N/A 0.6 mm N/A 0.6 mm N/A 0.5 mm
Min. Dist. Hole C/L to Edge N/A 3.9 mm N/A 4.3 mm N/A 4.9 mm N/A 5.5 mm N/A 3.9 mm
Fastener Material N/A 300 Series Stainless Steel
Standard Finish N/A Passivated and/or tested per ASTM A380
For Use in Sheet Hardness N/A Any
CAD Supplier N/A PennEngineering® (PEM®)
  • 1 See installation data for tooling requirements. Contact Technical Support (techsupport@pemnet.com) for other thicknesses.
  • 2 Threads are gageable to within 2 pitches on the “S” Max. dimension. A class 3B/5H maximum material commercial nut shall pass up to the “S” Max. dimension.