Catalog
CAD (0)
▾
RSF™ Rivet nuts for high, dynamic axial loads
Nuts
Application area
- Can be used for component thicknesses from 0.75 to 4.0 mm and tensile strengths of up to 1200 MPa
- Suitable for a wide range of high dynamic, static and impact load conditions
- Suitable for use where threaded fittings need to be resistant to high axial forces
- Also suitable for the accommodation of lateral forces
- Can be used for GRP, CFRP, aluminum or other materials
- Suitable for use with surface-treated, galvanized or painted components
Technical Characteristics
- Thread sizes: M6 to M12
- P.C. 8.8 (standard)
- Resistance to corrosion in accordance with the customer’s requirements
- No component material thinning during riveting process
- No adverse effects on the joint or function of the thread; no damage due to weld spatters
- High resistance to twist and ejection forces, even for thin sheet metals
- Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
- Nut positioning tolerance ranges can be halved as compared to welding methods
- Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
Part # |
Thread Size |
Panel Thickness Range |
CAD |
---|---|---|---|
RSF0612 | Thread Size N/A M6x1.00 | Panel Thickness Range N/A 0.75 - 3.25 mm | CAD N/A |
RSF0814 | Thread Size N/A M8x1.25 | Panel Thickness Range N/A 0.75 - 3.75 mm | CAD N/A |
RSF1019 | Thread Size N/A M10x1.50 | Panel Thickness Range N/A 1.00 - 4.00 mm | CAD N/A |
RSF1221 | Thread Size N/A M12x1.75 | Panel Thickness Range N/A 1.00 - 4.00 mm | CAD N/A |