Catalog
PEM® CASTSERT™ Press-in Inserts - Unified
PEM® Press-in Inserts for Castings
For Castings and Soft Metals HRB 70 / HB 125 or less
Designed for flush installation with flat punch and anvil into blind holes or thru-holes
Process cost savings vs. coil inserts or thread tapping
Installed into drilled holes or as-cast holes with low draft angle
Pilot for rapid seating and self-alignment
Symmetric for auto-feed capability
PEM® 300 Series Stainless Steel CASTSERT™ inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.
Fastener drawings and models are available at www.pemnet.com
Part # |
Thread Size |
Type |
Length A ±.005 |
After Knurl E (Nom.) |
Standard Material |
Standard Finish |
CAD |
|---|---|---|---|---|---|---|---|
| CKS-256-1 | Thread Size N/A .086-56 (#2-56) | Type N/A CKS | Length A ±.005 N/A .125 in | After Knurl E (Nom.) N/A .196 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A 
|
| CKS-256-2 | Thread Size N/A .086-56 (#2-56) | Type N/A CKS | Length A ±.005 N/A .250 in | After Knurl E (Nom.) N/A .196 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-440-1 | Thread Size N/A .112-40 (#4-40) | Type N/A CKS | Length A ±.005 N/A .175 in | After Knurl E (Nom.) N/A .228 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-440-2 | Thread Size N/A .112-40 (#4-40) | Type N/A CKS | Length A ±.005 N/A .300 in | After Knurl E (Nom.) N/A .228 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-632-1 | Thread Size N/A .138-32 (#6-32) | Type N/A CKS | Length A ±.005 N/A .200 in | After Knurl E (Nom.) N/A .259 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-632-2 | Thread Size N/A .138-32 (#6-32) | Type N/A CKS | Length A ±.005 N/A .375 in | After Knurl E (Nom.) N/A .259 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-832-1 | Thread Size N/A .164-32 (#8-32) | Type N/A CKS | Length A ±.005 N/A .250 in | After Knurl E (Nom.) N/A .295 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-832-2 | Thread Size N/A .164-32 (#8-32) | Type N/A CKS | Length A ±.005 N/A .475 in | After Knurl E (Nom.) N/A .295 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-032-1 | Thread Size N/A .190-32 (#10-32) | Type N/A CKS | Length A ±.005 N/A .300 in | After Knurl E (Nom.) N/A .358 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-032-2 | Thread Size N/A .190-32 (#10-32) | Type N/A CKS | Length A ±.005 N/A .525 in | After Knurl E (Nom.) N/A .358 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-0420-1 | Thread Size N/A .250-20 (1/4-20) | Type N/A CKS | Length A ±.005 N/A .375 in | After Knurl E (Nom.) N/A .452 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
| CKS-0420-2 | Thread Size N/A .250-20 (1/4-20) | Type N/A CKS | Length A ±.005 N/A .625 in | After Knurl E (Nom.) N/A .452 in | Standard Material N/A 300 Series Stainless Steel | Standard Finish N/A Passivated and/or tested per ASTM A360 |
CAD
N/A
|
