Registered UsersSign In
Search Catalog
      GO   
 All Categories    PEM Type TA™ Self-clinching microPEM® TackPin®
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Sheet-to-Sheet Attachment > Self-clinching microPEM® TackPin® > PEM Type TA™ Self-clinching microPEM® TackPin® > Part # TA-10-075  

Part # TA-10-075, TYPE TA™ microPEM® TackPin® Fasteners


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

New self-clinching microPEM® TackPin® (Type T™) fasteners for compact electronic assemblies enable sheet-to-sheet attachment, replacing costly screw installation in applications where disassembly is not required. TackPin fastener use eliminates typical screw-related issues (including tapping, cross-threading, torque control, and vibration backout) and ultimately promotes quick and easy installation with minimal hardware. TackPin fasteners can provide a good alternative to welds or adhesives.

Features and Benefits
  • Micro sized for fastening within very compact designs.
  • Attaches top sheets as thin as 0.2 mm / .008 in.
  • Clinches into base panels as hard as HRB 45 / HB 84.
  • Interference fit minimizes hole tolerance issues.
  • Tapered tip assists location.
  • Low-profile head provides cosmetic benefits.
  • Replaces screws: eliminating costly tapping, cross threading, torque control, vibration backout and installation time.
Ideal for today’s compact electronics
  • Laptops
  • Notebooks / Ultrabook™ Devices
  • Tablet Computers
  • Cell/Smart Phones
  • Gaming / Hand Held Devices
  • Ultrabook™ is a trademark of Intel Corporation





 Specifications   

Fastener Material

Aluminum

Base Panel Hole Size Code

10

Top Sheet Thickness Code

075

Top Sheet Thickness

0.71 to 0.79 mm
.028 to .031
in

Base Panel Min. Sheet Thickness1

0.89 mm
.035
in

Top Sheet Hole Size ± 0.05mm/± .002in

1.47 mm
.058
in

Base Panel Hole Size -0.05mm/ -.002in

1.02 mm
.040
in

A ± 0.025mm/±.001in

View
0.914 mm
.036
in

B ± 0.075mm/±.003in

0.610 mm
.024
in

C Max.

0.89 mm
.035
in

H ± 0.10mm/±.004in

2 mm
.079
in

P ± 0.05mm/±.002in

1.3 mm
.051
in

T ± 0.10mm/±.004in

0.2 mm
.008
in

Min. Dist. Hole C/L to Edge

1 mm
.039
in

Standard Finish

Plain

For Use in Sheet Hardness

HRB 45 or Less (Hardness Rockwell “B” Scale)
HB 84 or Less (Hardness Brinell)

CAD Supplier

PennEngineering® (PEM®)
1 0.89 mm/.035 in for blind holes and 0.5 mm/.020 in for thru holes.



 DOWNLOADS 

PEM Bulletin MPF