Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    Type SH™ Hard Panel Nuts - Metric
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Nuts for Sheet Metal > Hard Panel Nuts - Type SH™ > Type SH™ Hard Panel Nuts - Metric > View Items  

Type SH™ Hard Panel Nuts - Metric

 
Check up to five results to perform an action.


  • Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost
  • Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:
  • Addresses environmental concerns
  • Smaller outer diameter
  • Lighter weight
  • Flush on reverse side of panel
  • Close to edge of panel mounting
  • No embossing required
  • Hardened nut material provides stronger thread strength
  • Can be installed automatically using press or in-die technology



    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 5 of 5 1 

Part #

Thread Size x Pitch

A (Shank) Max.

Hole Size in Sheet + 0.08

E ± 0.25

Fastener Material

CAD
SH-M6-1X M6 x 1 1.38 mm 8.75 mm 11.18 mm Hardened Alloy Steel CAD Icon (for items table)
SH-M6-2X M6 x 1 2.21 mm 8.75 mm 11.18 mm Hardened Alloy Steel CAD Icon (for items table)
SH-M8-1X M8 x 1.25 1.38 mm 10.5 mm 12.7 mm Hardened Alloy Steel CAD Icon (for items table)
SH-M8-2X M8 x 1.25 2.21 mm 10.5 mm 12.7 mm Hardened Alloy Steel CAD Icon (for items table)
SH-M10-1X M10 x 1.5 2.21 mm 14 mm 17.35 mm Hardened Alloy Steel CAD Icon (for items table)
  Results 1 - 5 of 5 1