PEM Logo microPEM Logo autoPEM Logo PEMSERTER Logo Atlas Logo PennEngineering Automotive Fasteners Logo Profil Logo French Flag German Flag Chinese Flag Spanish Flag
Registered Users – Sign In
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Nuts for Sheet Metal > Hard Panel Nuts - Type SH™ > Type SH™ Hard Panel Nuts - Unified > View Items  
Download PDF Export to PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Type SH™ Hard Panel Nuts - Unified

 
Check up to five results to perform an action.


  • Installs into thin, harder, high strength steel materials (high strength steel sheets at 975MPA maximum ultimate tensile)
  • Allows overall weight reduction for all vehicles
  • Provides lower installed cost
  • Unplated threads may be oversized sized as permitted by thread standards to accept minimum plating thickness of .00020”/.0051 mm
Compare to other thin sheet fastening devices:
  • Addresses environmental concerns
  • Smaller outer diameter
  • Lighter weight
  • Flush on reverse side of panel
  • Close to edge of panel mounting
  • No embossing required
  • Hardened nut material provides stronger thread strength
  • Can be installed automatically using press or in-die technology


Compare Items
   
  Results 1 - 5 of 5 1 

Part #

Thread Size

A (Shank) Max.

Hole Size in Sheet + .003 - .000

E ± .010

Fastener Material

CAD
SH-0420-1X .250-20 (1/4-20) .054 in .344 in .440 in Hardened Alloy Steel CAD Icon (for items table)
SH-0420-2X .250-20 (1/4-20) .087 in .344 in .440 in Hardened Alloy Steel CAD Icon (for items table)
SH-0518-1X .313-18 (5/16-18) .054 in .413 in .500 in Hardened Alloy Steel CAD Icon (for items table)
SH-0518-2X .313-18 (5/16-18) .087 in .413 in .500 in Hardened Alloy Steel CAD Icon (for items table)
SH-0616-1X .375-16 (3/8-16) .087 in .500 in .623 in Hardened Alloy Steel CAD Icon (for items table)
  Results 1 - 5 of 5 1 
Home | Contact Us | Company News | Channel Partners | Suppliers      
Copyright ©2000 - 2011, PennEngineering • Terms of Use • Questions, comments or problems should be directed to the webadmin