Catalog
CAD (0)
  • Cart is empty
The Bellville washer shaped head of the microPEM® FlexTack™ fastener is designed to increase vertical installation tolerance in designs.

  • Alternative to using micro-screws, eliminating the need to tap or use threaded inserts.
  • Installation time to simply press the part in (1.5 seconds) is less than the time to thread a screw in equals less total installed cost.
  • The Belleville-shaped head allows for stack-up tolerance relief in a design.
  • Eliminates the following:

  • - Cost of screw, patch to prevent loosening, threaded insert or tapped hole and driver bits
    - Cost of rework due to cross-threading or driver bit “cam-out”
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Part #

Top Sheet Thickness

Base Panel Min. Sheet Thickness

Top Sheet Hole Size ± 0.05mm/± .002in

Base Panel Hole Size -0.05mm/ -.002in

A ± 0.025mm/±.001in

Min. Dist. Hole C/L to Edge

CAD

N/A 0.18 to 0.28 mm.007 to .011 in N/A 0.89 mm.035 in N/A 1.47 mm.058 in N/A 1.02 mm.040 in N/A 0.67 mm.026 in N/A 1 mm.039 in N/A CAD Icon (for items table)
N/A 0.28 to 0.38 mm.011 to .015 in N/A 0.89 mm.035 in N/A 1.47 mm.058 in N/A 1.02 mm.040 in N/A 0.77 mm.030 in N/A 1 mm.039 in N/A CAD Icon (for items table)
N/A 0.38 to 0.48 mm.015 to .019 in N/A 0.89 mm.035 in N/A 1.47 mm.058 in N/A 1.02 mm.040 in N/A 0.87 mm.034 in N/A 1 mm.039 in N/A CAD Icon (for items table)
N/A 0.48 to 0.58 mm.019 to .023 in N/A 0.89 mm.035 in N/A 1.47 mm.058 in N/A 1.02 mm.040 in N/A 0.97 mm0.38 in N/A 1 mm.039 in N/A CAD Icon (for items table)
1 - 4 of 4 | Results Per Page | View | Unit of Measure
1 

Download our brochure

Find out how Zygology can benefit your company through our client focussed solutions. Download our brochure today.

Product resources

Search and download useful resources from Zygology

We have a vast library of useful product resources that are free to download