Registered Users – Sign In
 
Search Catalog
      GO   
 All Categories    Self-Locating Projection Weld Nuts - Metric Type WN, WNS
PennEngineering
All Categories > PEM® Brand Fasteners for Metal Sheets and Panels > Weld Nuts > Weld Nuts – Types WN, WNS > Self-Locating Projection Weld Nuts - Metric Type WN, WNS > View Items  

Self-Locating Projection Weld Nuts - Metric Type WN, WNS

 
Check up to five results to perform an action.


PEM® weld nuts (Types WN/WNS) provide load-bearing threads in metal sheets too thin to tap, and permit faster assembly.

PEM brand weld nuts overcome many problems associated with other weld nuts – burn-outs, complicated electrodes and pilots, tedious time-consuming indexing and re-tapping to remove weld spatter. Their design, based on the experience of hundreds of users of weld nuts, speeds production using standard equipment, thereby reducing labor costs.

PEM stainless steel weld nuts offer the added advantage of resisting corrosion. You may specify steel or stainless steel for your requirements and be sure you are getting the weld nuts that are easiest to install. A variety of welding equipment is suitable for installation of PEM weld nuts. Best results have been obtained with a 50KVA press-type, spot-welding machine whose upper welding head moves vertically in a straight line with the lower electrode. Flat-faced electrodes with tip diameters .125” / 3.2 mm larger than the “E” dimension of the PEM weld nut should be used.



    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  
Compare Items
   
  Results 1 - 8 of 8 1 

Part #

Thread Size x Pitch

Type

C Max.

E - 0.25

Standard Material

Standard Finish

CAD
WN-M3-0CU M3 x 0.5 WN 4.37 mm 7.82 mm Carbon Steel Copper Flash CAD Icon (for items table)
WN-M4-0CU M4 x 0.7 WN 5.51 mm 9.42 mm Carbon Steel Copper Flash CAD Icon (for items table)
WN-M5-0CU M5 x 0.8 WN 6.32 mm 11.18 mm Carbon Steel Copper Flash CAD Icon (for items table)
WN-M6-0CU M6 x 1 WN 8.01 mm 13.26 mm Carbon Steel Copper Flash CAD Icon (for items table)
WNS-M3-0 M3 x 0.5 WNS 4.37 mm 7.82 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
WNS-M4-0 M4 x 0.7 WNS 5.51 mm 9.42 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
WNS-M5-0 M5 x 0.8 WNS 6.32 mm 11.18 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
WNS-M6-0 M6 x 1 WNS 8.01 mm 13.26 mm 300 Series Stainless Steel Passivated and/or tested per ASTM A380 CAD Icon (for items table)
  Results 1 - 8 of 8 1