Batch CAD Cart (0)
  • Cart is empty

Online literature contains the most current information available.

Application area

  • Can be used for component thicknesses from 0.8 to 2.5 mm and tensile strengths of up to 1500 MPa
  • Suitable for a wide range of high dynamic, static and impact load conditions
  • Suitable for use where threaded fittings need to be resistant to high axial forces
  • Can be used for aluminum or other materials, including press hardened steel
  • Suitable for use with surface-treated, galvanized or painted components

Technical Characteristics

  • Thread sizes: M6 to M8
  • P.C. 8.8 (standard)
  • Resistance to corrosion in accordance with the customer’s requirements
  • Requires a pre-pierced hole in the application
  • No adverse effects on the joint or function of the thread; no damage due to weld spatters
  • High resistance to twist and ejection forces
  • Stud positioning tolerance ranges can be halved as compared to welding methods
  • Water-tight and gas-tight in reference to the requirements demanded by the automotive sector and dependent on the quality of the component material
  • Straightforward, in-process and non-destructive quality testing possible by worker instead of elaborate destructive tests
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 

Part #

Thread Size

Panel Thickness Range

CAD

NBR06 N/A M6x1.00 N/A 0.80 - 2.00 mm N/A
NBR08 N/A M8x1.25 N/A 0.80 - 2.50 mm N/A
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1